Autoplay
Autocomplete
Previous Lesson
Complete and Continue
CCNA Level III - Enterprise Networking, Security, and Automation
CCNA Preparation - Test Bank Links
GNS Practical Lab Net 46
Net46 practice Lab Modified - Etherchannel, DHCP, Intervlan Routing
GNS3 Practical lab Net 46 - Feb 17
CCNA test Bank Links
Anki Flashcards (2:09)
PacketTracer Lab Outline for SRWE Part 1 and Part 2
GNS3 Setup For Labs
Lab Materials
Installation of GNS3 (13:04)
IF GNS3 VM did not install or Did not start Troubleshoot and Fix (0:35)
GNS3 How to configure Font Size for Consoles (1:55)
GNS3 Intro Labs
CDP Lab GNS3 (9:35)
Connect GNS3 to Internet (2:25)
GNS Connect to Internet - IP route on Router connected to college
GNS3 Lab - Vlans Etherchannel OSPF and Nat Exercise
4 - Demo GNS3 Lab Configure NAT and Test (10:22)
CCNA Switching Routing and Wireless - Day 1
Module 1 - Basic Device Configuration (55:06)
Module 2 - Switching Concepts (23:35)
GNS3 Version of Packet Tracer - Basic Switch Configuration - Physical Mode (13:28)
CCNA Switching Routing and Wireless - Day 2
Module 3 - VLANS (43:32)
Module 4 - Intervlan Routing (23:14)
GNS3 - Intervlan Routing using Router on a stick - Example1 (24:23)
GNS3 Layer 3 Switch Configured for Intervlan Routing - From PKT Tracer Lab in Curriculum - Example 2 (22:48)
GNS3 - Layer 3 Switch Final part Configure NAT on Router and Test- From PKT Tracer Lab in Curriculum - Example 2 (4:13)
GNS3 - Intervlan Routing Example 3
Day 3
Module 5 - Spanning Tree Protocol (46:26)
GNS3 - Spanning tree protocol - Initial Configuration and Port Types (11:23)
Module 6 - EtherChannel (11:48)
GNS3 - Configure Etherchannel Part 1 (21:54)
GNS3 - Etherchannel TroubleShooting - Configure Etherchannel Part 2 (3:14)
Day 4
Module 7 - DHCPV4 (25:43)
GNS3 - Lab - RIP DHCP IpV4 IPV6 (23:41)
Module 8- SLAAC and DHCPV6 (32:36)
Day 5
Chapter 9 - First Hop Redundancy Protocol (FHRP) (12:26)
GNS3 - Hot Standby Routing Protocol - OSPF - Default Route - Connect to Internet - NAT (36:30)
GNS 3 - Testing of Hot Standby Routing Protocol (3:12)
Day 6
Chapter 10 - Lan Security Concepts (47:30)
Chapter 11 - Switch Security (22:10)
GNS3 - Portfast Switch Security (10:06)
Net 46 - Setup and Configure Intervlan Routing, Etherchannel, DHCP and DHCP Relayection
Lesson 1 - Net 46 - GNS3 Setup Diagram for Practice Practicals - Packet Tracer Lab Demo Switch Security (13:43)
Lesson 2 - Net 46 - Configure Intervlan Routing, Etherchannel, DHCP and DHCP Relay
Lesson 3 - Add DHCP Server to Project (7:06)
Lesson 4 - Label IPs On Topology Diagram (2:08)
Lesson 5 - Configure OSPF and Setup DHCP and test on VLANS (26:02)
Lesson 6 - Troubleshoot IP-Helper Address for VLAN 20 (1:42)
Lesson 7 - Net 46 - HSRP and Load Balance HSRP using Diagram Above
Lesson 8 - Demo of Setup Configurations for HSRP (19:49)
Lesson 9 - OSPF Config for all Vlans on R2 R4 and R5 (9:26)
Lesson 10 - Setup NAT to Internet (5:58)
Day 7
Chapter 12 Wireless Lan Concepts (57:20)
Chapter 13- Wireless Lan Configuration (48:01)
CCNA Level 3 Theory
Chapter 14- Routing Concepts - Part 1 (21:46)
Chapter 14 - Routing Concepts - Part 2 (17:37)
Chapter 15 - Static Routing (17:20)
Schedule
Connect VM to GNS3 (9:21)
Net 46 Lectures
Module 12 - WLAN Concepts (58:49)
Module 13 - WLAN Configuration (49:37)
Module 14 - Routing Concepts (21:24)
Moudle 14.1 - Routing Table (29:09)
Module 14.3 - Basic Router Configuration (10:20)
Module 15 - Static Routing (23:10)
CCNA Level III - Enterprise Networking, Security, and Automation
Module 1 - Intro Single-Area OSPFv2 - Packet Tracer Setup (22:14)
Module 1 - Single-Area OSPFv2 - OSPF Features and Function (31:58)
Module 2 - Single Area OSPF Configuration (40:09)
GNS3 - Lab OSPF and DHCP - Setup (10:44)
GNS3 - Lab OSPF and DHCP - Configuration (30:26)
OSPF and Packet Capture - DR BDR (44:08)
Module 3 - Network Security Concepts (44:48)
Module 4 - ACL Concepts - Part 1 - Overview and Wildcard masks (18:52)
Module 4 - ACL Concepts - Standard Extended Named ACL and Placement (10:12)
Module 5 - Configure Extended IPv4 ACLS (25:39)
Demo - Configure ACLs for web DNS FTP SSH (53:52)
Module 6 - NAT (28:44)
Net 46 - GNS 3 Lab - Add Fedora with Apache SSH - Configure NAT, ACLS (11:09)
Module 7 - WAN (33:12)
Module 8 - VPNS (24:05)
GNS3 - Configure VPN Tunneling
Module 9 - QOS (26:41)
Module 10 - Network Management (46:39)
Install Fedora and rsyslog Server (16:28)
GNS3 - Kiwi Syslog Server Setup (11:22)
Install tftp server on Fedora (14:06)
GNS3 - Connect a VM to our existing OSPF Lab - Net 41 (22:26)
Module 11 - Network Design (17:13)
Module 12 - Network TroubleShooting (14:32)
Module 13 - Network Virtualization (17:46)
Module 14 - Network Automation (47:23)
Python Exercises
Python simple Exercises on Windows (47:31)
Net 46 February March 2026
Module 1 - Single Area Ospf - Part 1 (36:33)
Module 1 - Single Areas OSPF Part 2 (21:31)
Module 1 - OSPF Part 3 (29:52)
Module 4 - ACL (35:19)
GNS3 - Python
How to ensure configurations are saved on the Docker Host (2:41)
1 - GNS3 Talks: Python for Network Engineers with GNS3 (Part 1). Network programmability made easy
2 - GNS3 - Install and Configure Network Automation App and Project Config Overview (9:12)
3 - GNS3 Talks: Python for Network Engineers with GNS3 (Part 2) - Configure VLANs on switches
4 - GNS3 Lab - Quick Config using Scripts (3:59)
5 - GNS3 GNS3 Talks: Python for Network Engineers with GNS3 (Part 3) - Remove Passwords and improve scripts (8:39)
6 - GNS3 Talks: Python for Network Engineers with GNS3 (Part 4) - Create switch VLANs using loops (8:18)
7 - Alternate Project for completing Python Exercises (1:17)
8 - GNS3 Talks: Python for Network Engineers with GNS3 (Part 5) - Multiple switches, multiple VLANs (18:01)
9 - GNS3 Talks: Python for Network Engineers with GNS3 (Part 6) - In-band management and save configs
10 - GNS3 Talks: Python for Network Engineers with GNS3 (Part 7) - How to write better code and styles
11 - GNS3 Talks: Python for Network Engineers with GNS3 (Part 8) - Opening Files and spacing importance! (11:54)
IF GNS3 VM did not install or Did not start Troubleshoot and Fix
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock