Autoplay
Autocomplete
Previous Lesson
Complete and Continue
CCNA - Level II - Routing and Switching Version 7
GNS3 Setup For Labs
Lab Materials
Location of Images Required for GNS if Not in ISO folder (0:48)
Lesson 1 - Installation of GNS3 (13:04)
Lesson 2 - Processor error GNS3 Fix (0:56)
Lesson 3 - IF GNS3 VM did not install or Did not start Troubleshoot and Fix (0:35)
Lesson 4 - GNS Initial Setting up A lab and connecting and labelling Routers and switches (13:40)
Lesson 5 - Configure RIP in GNS3 (6:24)
Lesson 6 - GNS - Changing Font Size in Consoles (1:55)
Lesson 7 - CDP Lab GNS3 (9:35)
Leson 8 - How to set an IP subnet mask and gateway on VPCS in GNS3 (1:29)
Lesson 10 - Connect GNS3 to Internet and configure OSPF and default route (16:41)
CCNA Switching Routing and Wireless - Day 1
Module 1 - Basic Device Configuration (55:06)
CCNA Switching Routing and Wireless - Day 2
Module 2 - Switching Concepts (23:35)
GNS3 Version of Packet Tracer - Basic Switch Configuration - Physical Mode (13:28)
Day 3
Lesson 1 - Module 3 - VLANS (43:32)
Lesson 2 - GNS3 Lab - Using GNS3 for Labs in Module 3 (5:48)
Lesson 3 - Module 4 - Intervlan Routing (23:14)
Lesson 4 - Intervlan Routing using Router on a stick - GNS3 Lab (24:23)
Lesson 5 - GNS3 Layer 3 Switch Configured for Intervlan Routing (22:48)
Day 4
Lesson 7 - Module 5 - Spanning Tree Protocol (46:26)
Lesson 8 - GNS3 - Spanning tree protocol - Initial Configuration and Port Types (11:23)
Lesson 9 - GNS3 Spanning Tree Lab with Vlans
Lesson 10 - Module 6 - EtherChannel (11:48)
Day 5
Lesson 12 - GNS3 - Configure Etherchannel Part 1 (21:54)
Lesson 13 - GNS3 - Etherchannel TroubleShooting - Configure Etherchannel Part 2 (3:14)
Day 6
Lesson 14 - Module 7 - DHCPV4 (25:43)
Lesson 16 - Module 8- SLAAC and DHCPV6 (32:36)
Lesson 17 - Configuring IP address in VPCS (1:19)
Day 7
Lesson 20 - PKt Tracer Lab on Gns3 Part 2: Verify SLAAC address assignment from R1 Part 3: Configure and verify a Stateless DHCPv6 Server on R1 (8:55)
Lesson 22 - GNS3 - Lab - RIP DHCP IpV4 IPV6 (23:41)
Lesson 23 - Chapter 9 - First Hop Redundancy Protocol (FHRP) (12:26)
Lesson 24 - GNS3 - Hot Standby Routing Protocol - OSPF - Default Route - Connect to Internet - NAT (36:30)
Lesson 25 - GNS 3 - Testing of Hot Standby Routing Protocol (3:12)
Day 8
Lesson 26 - Chapter 10 - Lan Security Concepts (47:30)
Lesson 27 - Chapter 11 - Switch Security (22:10)
Lesson 28 - Connect VM to GNS3 (9:21)
Net 46 Feb 9 2026
chap11 (17:15)
Day 9
Chapter 12 Wireless Lan Concepts (57:20)
Day 10
Chapter 13- Wireless Lan Configuration (48:01)
Lesson 20 - PKt Tracer Lab on Gns3 Part 2: Verify SLAAC address assignment from R1 Part 3: Configure and verify a Stateless DHCPv6 Server on R1
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock